How to maintain your video surveillance system?

Home / Security / How to maintain your video surveillance system?
How to maintain your video surveillance system?

Since video surveillance systems are relatively expensive investments, they are expected to last a long time and be paid for by active protection over the longest possible time. These systems being of all kinds and sold at very different prices, they are nonetheless subject to identical risks and threats. Whether a video surveillance system is installed in a home, store or public space, it will be affected by the same factors. Regular maintenance of your video surveillance system may nevertheless limit the effects of time on your video surveillance system.

video surveillance system

 Clean the optics

The optical part of the cameras is not only blurred by dust and grime carried by the wind, but also by the wear caused by the wind and the fine particles on the glass, which polish it and make it opaque. Some cameras, especially those located in windy places, will eventually suffer from this problem. So be sure to clean your glasses regularly.

 Limit camera humidity

Even if your cameras are protected by housing, they are subject to air humidity. Ultimately, this humidity can damage them and even destroy them. Regularly, and especially during the wet season, remember to open your cameras and check their condition.

Empty the recorder

Your recorder keeps the images filmed by your cameras. Even if it still has room for recording images, be sure to delete unnecessary, because like a computer, your recording box works less well if it is almost full.

Regularly change the wires connecting the cameras

The wires connecting your cameras to your recorder represent the Achilles heel of your video surveillance system. These fine and fragile wires are quickly damaged and can make your entire system unusable. So remember to replace them regularly with new wires.

How to protect your video surveillance system from the rain?

The weather is an enemy of video surveillance, but rain is the sworn enemy. Your cameras being stuffed with electronics sometimes very sophisticated, humidity is the first danger they face. Whether installed indoors or outdoors, even a small amount of humidity will overcome it. It is indeed the first cause of loss of cameras, after the voluntary degradation’s. So, even if it is impossible to avoid any trace of humidity, it is important that you pay attention to this parameter so that your video surveillance system lasts as long as possible. Here are some tips to help you reduce the risk of your CCTV system being damaged by moisture.

 Install waterproof cases

The key word when it comes to combating humidity is waterproofing. Installing waterproof cases on your cameras located outside will protect them from rain and outdoor humidity. Remember that all of your cameras are subject to outside humidity, not just cameras exposed to rain. So equip all your cameras with waterproof cases to avoid taking risks.

Install humidity sensors

Some places in your home have dangerous humidity levels for your cameras. This is the case of rooms located near the bathroom or kitchen, or even the corridor that leads there. It is enough that the water vapor has a little too much tendency to be projected against a camera, so that this one finally gives up the soul. Some humidity sensors reduce the humidity in the air in your home. Install some of them in strategic places, to avoid any problem.

 Choose wireless video surveillance systems

Wireless video surveillance systems are less sensitive to humidity than video surveillance systems where the cameras are connected by electrical wires. Indeed, the wires tend to capture moisture, rust and eventually break or cause a short circuit. Install a wireless video surveillance system if you want to have as few problems with humidity as possible.

How to protect a large house?

Protecting your home is inevitable, whether small or very large. The size of the houses has indeed no relation to the number of burglaries. There is even sometimes a decrease in the risk of burglary with the increase in the size of the house. Small and isolated houses are more often targeted by burglars who need less time to visit important rooms. However, faced with the increasing frequency of burglaries, it is necessary to monitor your home, whether large or small. To monitor a large house, certain points must be known for the protection to be effective.

Mix reduced field and wide field cameras                  

The larger your property, the more you need to diversify your cameras by not limiting yourself to just one type of camera. Indeed, open and wide places or rooms must be monitored by wide field cameras. These will allow you to cover a large area without worrying about the angle chosen. These cameras lacking image quality, install in the corridors and reduced spaces which lead there, cameras with reduced field which will capture the details.

 More cameras don’t necessarily mean more protection

Some people think that security camera installation in Chicago as many cameras as possible is the best way to have complete protection. However, too many cameras increase the chance that one of them will stop working and create a flaw in your system. Choose cameras posted at strategic locations.

 Don’t forget discretion

Even for a large house, the burglar does not know that you have a video surveillance system. You can therefore choose not to install too many cameras in a visible way. A large overprotected house will have an attractive effect on more organized burglars who are willing to take risks for a house they believe to be filled with very valuable goods.

How to boost the efficiency of your video surveillance system?

A video surveillance system must not present any defect. It must be adapted to the home in which it is installed and be maintained regularly. A home equipped with a video surveillance system then becomes almost invulnerable. The deterrent effect of the cameras avoiding most burglaries, the use of video surveillance images will be used to find most of the stolen goods. Some burglaries are, however, the work of groups that the presence of video surveillance cameras cannot dissuade. CCTV systems only allow, in this case, to try to find goods that are much more efficiently and quickly returned to the market. There are accessories and ancillary systems that can enhance the effect of a video surveillance system.

 Install alarms

Alarms are very effective even in the face of the most determined and experienced burglars. In addition to being deafening, an alarm puts burglars in a weak position, particularly in the case of store burglaries, where passers-by are often brakes to the malicious act.

Connect your system to that of law enforcement

The police sometimes offer very sophisticated systems, which allow them to be directly notified if your home is broken into. An alarm system is triggered at the slightest intrusion, and makes the intervention of the police much faster. This system will also have a strong deterrent effect on burglars.

 Install motion detectors

Motion detectors increase the efficiency of your already installed video surveillance system. Indeed, your CCTV cameras will only be triggered upon detection, and will therefore operate for a shorter time. The hours less of useless image capture and wearing out your cameras and filling your recorder box, will be as many more hours during which your video surveillance system will work perfectly.

Leave a Reply

Your email address will not be published.

  • Partner links